Flex Series
Features:
- ProFlex PU is ECO-friendly material, no discomfort in contact with the skin.
- Bright colors, firm coloring, resistant to ultraviolet rays and sunlight.
- Soft touch, good abrasion resistance and not easy to tear.
- Water-washing resistance, more than 50 times of washing.
- Superior air permeability makes clothes more breathable.
- Easy to cut, easy to discharge waste, easy to transfer.
- For any type of fabric, including 100% cotton, 100% polyester, or a combination of cotton and polyester.
- Product thickness: 0.1mm (100 μm, 10S), ±0.01mm
- The pressing temperature of PU series is 135-145℃, time is 12-15 seconds, pressure is 4-6K, peeling: cold/warm peeling.
Product shortcomings:
- ProFlex PU has a sticky back of the PET heat transfer film, so is not very easy to weed.
- ProFlex PU has a sticky back of the PET heat transfer film, so is not very easy to weed.
- The pressing temperature cannot be higher than 170°, otherwise the HTV will melt easily.
- It is not suitable for waterproof coating and cloth surface with heavy silicone oil.
- Dark cloth or fiber cloth will be easy to color migration.
Heat transfer apply
4-6 KG/Mpa
Pressure
135-145°C
Time
12-15 seconds
Heat transfer apply
4-6 KG/Mpa
Pressure
135-145°C
Time
12-15 seconds
Heat transfer apply
4-6 KG/Mpa
Pressure
135-145°C
Time
12-15 seconds
Product Info
1. Grate your design on the computer.
2. Cut the shape by laser machine, Blade: 45 Degrees.
3. Weed the useless film around the image
4. Place the front image in the place
5. Heat transfer applies from 4-6 KG/Mpa, pressure at 135-145°C, degrees for 12-15 seconds.
6. When it is cold, remove the polyester backing film.
1.Always make sure you run through test prints and cuts before starting a production run or extensive printing.
2.Take care with your cutting blade and where you may be working. There is potential for melt layer separation during the cutting process.
3.Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16″ for lettering & logos.
4. Different cutting machines have different cutting parameters. for example:
Silhouette machine, cutting mode: Blade: 2 Speed: 8 Thickness: 5.
Cricut Explore Air machine, cutting mode: Iron-on.
Cricut Maker machine, Category: Iron-on; Setting: Iron-On; Pressure: Default.
5. If you need to use an iron to press HTV, please choose a “no steam” iron.
2.Take care with your cutting blade and where you may be working. There is potential for melt layer separation during the cutting process.
3.Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16″ for lettering & logos.
4. Different cutting machines have different cutting parameters. for example:
Silhouette machine, cutting mode: Blade: 2 Speed: 8 Thickness: 5.
Cricut Explore Air machine, cutting mode: Iron-on.
Cricut Maker machine, Category: Iron-on; Setting: Iron-On; Pressure: Default.
5. If you need to use an iron to press HTV, please choose a “no steam” iron.
- It is used for all fabric products such as clothing trademark printing, personalized T-shirts, personalized hats, advertising shirts, handbags, bags, electronic products, and so on.
- Recommended fabrics: 100% Cotton, 100% Polyester, 100% Preshrunk, Poly / Cotton Blends.
- 1.Store at room temperature (temperature: 20 ± 5 °C, humidity: 35 ± 15%) and avoid exposure to direct sunlight. Keep away from direct heat, sunlight and humidity.
- 2.Recommended shelf life is 12 months.
- Allow 24 hours after application before washing.
- 40°C Standard Wash.
- Wash and tumble dry inside out.
- Do not use bleach or other corrosive chemicals.
- If you need to iron, only iron on the backside of the garment.
Contact Us
Professional Vinyl Manufacturer In China. – Since 2004.
Find Out More
| > Customize Pattern |
| > Color Changing-HDW/CDW |
| > Hologram Rainbow-CH |
